D-Link DGS-1510-52X 48-Port Gigabit Stackable Smart Managed Switch w/ 4x 10GbE SFP+ Ports
Package: RETAIL
Ma Labs List#: 70709
Ma Labs SKU#: DL-151052X
Mfr#: DGS-1510-52X
UPC Code: 790069406065
Special Order: Non-cancellable!
- Mfr Part Number: DGS-1510-52X
- Ports: 48x 10/100/1000 Mbps Ports, 4x 10G SFP+ Ports
- Port Standards & Functions:
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- 802.3ae 10 GbE
- IEEE 802.3x Flow Control for Full-Duplex Mode
- Auto-negotiation
- Network Cables: UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)
- Full/Half Duplex: Full/half duplex for 10/100 Mbps and Gigabit speed
- Media Interface Exchange: Auto or configurable MDI/MDIX
- Performance:
- Switching Capacity: 176 Gbps
- Transmission Method: Store-and-forward
- MAC Address Table: 16,000 entries per device
- MAC Address Update: Up to 512 static MAC entries; Enable/disable auto-learning of MAC addresses
- Maximum 64 Bytes Packet Forwarding Rate: 130.95 Mpps
- Packet Buffer Memory: 3 MB per device
- Software:
- Stackability:
- Virtual Stacking Support:
- D-Link Single IP Management
- Up to 32 devices per virtual stack
- Up to 20G stacking bandwidth
- Physical Stacking:
- Supports Duplex Chain/Ring topology
- Up to 40G stacking bandwidth full duplex
- Up to 6 units per stack
- Virtual Stacking Support:
- L2 Features:
- MAC Address Table: up to 16,384
- Flow Control: 802.3x Flow Control; HOL Blocking Prevention
- Jumbo Frame up to 9216 Bytes
- IGMP Snooping:
- IGMP v1/v2 Snooping
- IGMP v3 awareness
- Supports 512 IGMP groups
- Supports 128 static multicast addresses
- IGMP per VLAN
- Supports IGMP Snooping Querier
- Host-based IGMP Snooping Fast Leave
- MLD Snooping:
- Supports MLD v1/v2 awareness
- Supports 512 groups
- Supports 128 Static Multicast Addresses
- Per VLAN MLD Snooping
- Host-based MLD Fast Leave
- MLD Snooping Querier
- Spanning Tree Protocol: 802.1D STP , 802.1w RSTP, 802.1s MSTP
- Loopback Detection
- 802.3ad Link Aggregation: Max. 32 groups per device/8 ports per group
- Port Mirroring:
- Support 4 mirroring groups
- One-to-One, Many-to-One, flow-based (ACL) mirroring
- Multicast Filtering: Forwards all unregistered groups; Filters all unregistered groups
- LLDP, LLDP-MED
- ERPS (Ethernet Ring Protection Switching)
- VLAN:
- 802.1Q Tagged VLAN
- 4K VLAN Groups
- Configurable VID - 0~4094
- GVRP
- Asymmetric VLAN
- Auto Voice VLAN
- Auto Surveillance VLAN
- MAC-based VLAN
- Protocol-based VLAN
- QoS (Quality of Service):
- CoS based on: 802.1p priority, VLAN, MAC address, Ether type, IP address, DSCP, Protocol type, TCP/UDP port number, DSCP of IPv6 Traffic Class, IPv6 flow label
- 802.1p Quality of Service
- Queue Handling: Strict Priority Queue (SPQ), Weighted Round Robin (WRR), Deficit Round Robin (DRR), SPQ + WRR
- 8 queues per port
- Bandwidth Control: Port-based (Ingress/Egress, min. granularity for 10/100/1000 BASE-T ports is 64 Kb/s)
- L3 Features:
- ARP: 256 Static ARP; Supports Gratuitous ARP
- IPv6 Neighbor Discovery (ND)
- 16 IP Interfaces
- Default Routing
- Static Routing: 64 IPv4 Static Route Entries; 32 IPv6 Static Route Entries
- UDP helper
- Access Control List (ACL):
- ACL based on - 802.1p priority; VLAN; MAC address; Ether type; IP address; DSCP; Protocol type; TCP/UDP port number; DSCP of IPv6 Traffic Class; IPv6 flow label
- ACL Actions - Permit; Deny
- Max. 256 access list
- Max. 768 rules
- Single or multiple ports (each rule)
- Time-based ACL
- ACL Statistics
- Security:
- Port Security - Supports up to 128 MAC addresses per port
- Broadcast/Multicast/Unicast Storm Control
- Dynamic ARP Inspection
- D-Link Safeguard Engine
- DHCP Server Screening
- ARP Spoofing Prevention - Max. 64 entries
- SSH - Supports v2; Supports IPv4/IPv6
- BPDU Attack Protection
- DoS Attack Prevention
- SSL - Supports v1/v2/v3; Supports IPv4/IPv6
- Traffic Segmentation
- IP-MAC-Port Binding - DHCP snooping, IP Source Guard, Dynamic ARP inspection, IPv6 DHCP Guard, IPv6 RA Guard, IPv6 Snooping, IPv6 Source Guard, IPv6 ND Inspection
- Management:
- Command Line Interface
- Telnet Server
- TFTP Client
- IPv6 Neighbor Discovery
- Configurable MDI/MDIX
- SNMP - Supports v1, v2c, v3
- SNMP Trap
- System Log - Max. 10,000 log entries
- Debug Command
- Multiple Images
- Surveillance mode
- DHCP Client
- D-Link Network Assistant support
- SNTP
- ICMPv6
- IPv4/v6 Dual Stack
- DHCP Auto Configuration
- RMON v1
- LLDP, LLDP-MED
- DHCP relay
- Web based GUI
- NTP
- sFlow
- Telnet client (supports CLI only)
- PD-Alive (PoE models only)
- Stackability:
- D-Link Green 3.0 Technology:
- Power Saving by: Link Status, LED or Port Shutoff, System Hibernation mode, Time-based PoE (PoE models only)
- AC Input: 100 to 240 VAC 50/60 Hz internal universal power supply
- Power Consumption:
- Maximum: 44.2 W
- Standby: 28.9W
- Smart Fan Quantity: 2
- Acoustics: 45.8 dB(A)
- Heat Dissipation: 138.8 BTU/hr
- Diagnostic LEDs:
- Power/Stacking ID/Fan (per device)
- Link/Activity/Speed (per 10/100/1000 Mbps port)
- Link/Activity/Speed (per Gigabit SFP port)
- Link/Activity/Speed (per 10G SFP+ port)
- Power/Stacking ID/Fan (per device)
- MTBF: 416,789 hr.
- Certifications: CE, FCC, C-Tick, VCCI, BSMI, CCC
- Safety: cUL,CB
- Form Factor: 19" standard rack mounting width, 1U
- Dimensions: 17.36 x 9.84 x 1.73 inch / 440.0 x 250.0 x 44.0 mm
- Weight: 5.3 lbs / 2.4 kg